Taizhou xingzhou industrial &mining Co.,Ltd---sheet metal clamp

一、金属吊夹具

二、金属吊具

三、纤维吊带(尼龙吊带)

四、安全防护

五、造纸用品

product description
1.Billet( plate) lifter is used for lifting steel billet, aluminum plate &copperplate.
2.Clamp force is produced by lever mechanism through gravity of slab.
3.The opening and close of clamp is controlled by auto latch mechanism.
4.Single or multiple slabs can be lifted.
5.Single in structure, convenient and agile in usage.
6.The wide range of available square billet is 100mm-400mm.
7.1T to 60T billet handing capacity depending on the size of the lifter.
8.if you need special type, please offer the date you need.

The maximum weight of the billet( plate)
The maximum width of the billet( plate)
The minimum width of the billet( plate)
The maximum length of the billet( plate)
The minimum length of the billet( plate)
The maximum thickness of the billet( plate)
The minimum thickness of the billet( plate)

Reference size(only for Reference, when booking we will design for you according the using environment )

Working load limit T	opening range mm	Tong notch height mm	the length of the lifter mm	the size of largest form		Lifter weight
Working load limit T	opening range mm	Tong notch height mm	the length of the lifter mm	Whole width	Whole height	Lifter weight
5	450-600	250	800	1200	1800	650
5	650-1000	250	800	1500	2300	900
8	150-450	250	1200	2000	2400	1400
8	450-600	250	1200	1600	2500	1400
8	450-750	300	1200	1600	2200	1450
10	450-900	300	1500	1900	2600	2500
10	650-1000	300	1500	2000	2600	2800
10	700-1100	300	1500	2100	2600	2800
12	450-750	300	2000	1800	2400	2600
12	235-800	300	2000	2300	3000	2700
16	600-1100	300	2500	2400	3100	4200
16	850-1250	300	2500	2000	3000	4500
20	800-1300	300	3000	2200	3400	4800
20	950-1400	300	3000	2500	3500	4800
20	1100-1600	300	3000	2400	3700	5000
25	1000-1600	600	3000	3000	3900	6500
25	1250-1750	450	3000	2800	3900	6800
32	700-1400	450	3000	2800	4200	8000
32	650-1500	450	3000	3400	4600	8000
32	900-2300	600	3000	4700	6300	10000
40	850-1600	450	3500	3500	4900	11000
40	1250-1750	450	3500	3000	3000	10000
40	1600-2150	450	3500	3300	4300	11000
50	1250-2150	450	4000	4000	5600	16000
50	1850-2500	450	4000	3800	5000	17000
50	1200-2750	750	4000	5600	7600	19000
63	2050-2750	600	4000	4300	5800	23500
80	750-1650	900	4500	5300	7100	27500

Care &use of lifting device
1.DO not stand under the working billet lifter.
2.Never exceed the working load limit of the billet lifter.
3.The lifter should be in the centre of the billet when working, otherwise the lifter will be inclined and easily damaged.
4.If the fixture gets a small damage, you should be repaired immediately . otherwise, the damage will be speed up.


Jiangsu Xingzhou Industrial and Mining Equipment Co.,Ltd　　　E_mail:　jsxzie@gmail.com 　jsxzie@jsxzok.com 　　Telephone: +86-523-86161543/86112333　 Fax:86-0523-86112111 　　Mobile phone：+86-15605263338　　 Address: TAIZHOU GAOGANG SCIENCE AND TECHNOLOGY PARK